– 13 –
9. SETTING THE BENCH MORTISER
Warning! Remove the plug before carrying out any
adjustment, servicing or maintenance.
9.1 CHISEL AND BIT INSTALLATION -
FIGS. 7 - 12
Undo the screws securing the chuck access covers
(7)
.
Select the correct reducing bush
(16)
for the
diameter chisel you are using. The hole in the bush
must line up with the hex. bolt
(13.1)
.
Insert the drill bit and chisel into the hole.
Push the chisel up as far as possible into the head,
and tighten the hex. bolt
(13.1)
.
Allow the drill bit to gently rest on the table whilst
completing.
Note: Care must be taken when handling the
mortice chisels as they are very sharp.
Tighten the chuck key
(7.1)
.
FIG. 7
FIG. 8
FIG. 9
FIG. 10
(7)
(7)
(16)
(13.1)
(7.1)
(13.1)
