10
2.4 Technical Specifications
Display
: Backlit, 240*320 TFT color display
Working Temperature
: 0 to 60
℃
(32 to 140
℉
)
Storage Temperature
: -20 to 70
℃
(-4 to 158
℉
)
Power Supply
: 8-18V vehicle power, 3.3V USB power
Dimensions (
L*W*H
)
: 200*100*38mm
Weight
: 1.0Kg
3 Getting Started
This section describes how to provide power to the tool, provides brief introductions of
applications loaded on the tool and display screen layout and illustrates how to input text and
numbers with the scan tool.
3.1 Providing Power to Tool
Before using the tool, make sure to provide power to the tool.
The unit operates on any of the following sources:
●
12-volt vehicle power
●
USB connection to personal computer
3.1.1 Connecting to Vehicle Power
The tool normally powers on whenever it is connected to the data link connector (DLC).
To connect to vehicle power:
1.
Locate the data link connector (DLC). The DLC is generally located under the dash on the
driver side of the vehicle.
2.
Attached the Diagnostic cable to the tool and tighten the captive screws to ensure good
connection.
3.
Connect a correct adapter to the data cable according to the vehicle being serviced and plug it
into the vehicle DLC.
4.
Switch the ignition key to the ON position.
5.
The tool automatically boots up.
IMPORTANT
Never try to provide power for the scan tool from USB connection when the scan tool is
communicating with a vehicle.
3.1.2 Connecting to PC with USB Cable
The scan tool also receives power through the USB port when it is connected to a PC for updating
software and transferring saved files.
To connect to PC:
1.
Insert the small end of the USB cable to the USB port at the right side of the tool and the large
end to a computer.
2.
Press the power switch of the scan tool to power it on.
3.2 Application Overview
When the scan tool boots up, the Home screen opens. This screen shows all applications loaded
on the unit.
Following applications are preloaded into the tool:
●
OBDII/EOBD
– leads to OBDII screens for all 9 generic OBD system tests.
●
BRT
– leads to screens for battery replacement process.
