12
9. OPERATING INSTRUCTIONS
IMPORTANT: Make sure that the mains
voltage matches the voltage stated on the
machines rating plate.
9.1 SWITCH OPERATION - FIG. 5
The trigger switch
on this tool is fitted
with a locking device,
, allowing the
tool to be operated for longer periods of
time without interruptions. The machine will
now continue to run until trigger
is
pressed, automatically releasing locking
button
.
Before inserting the plug into the socket,
check that the switch is in the unlocked
position. When the tool is not to be used for
long periods, remember to leave the switch
device in the unlocked position.
9.2 PRACTICAL TIPS
You will only achieve good results if you
use sharp chisels. You should therefore
sharpen the chisels promptly to ensure that
they produce good results and provide a
long service life.
Important: You only require slight contact
pressure for chiselling. Excessive contact
pressure will place an unnecessary strain on
the motor. Check the chisels at regular
intervals. Sharpen or replace blunt chisels.
FIG.5
