Draper 15102 User Manual Download Page 4

13

4

3. GUARANTEE

3.1 GUARANTEE

Draper tools have been carefully tested and inspected before shipment and are guaranteed to be 
free from defective materials and workmanship.

Should the tool develop a fault, please return the complete tool to your nearest distributor or 
contact: 

Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England. 
Telephone Sales Desk: (023) 8049 4333

 or: 

Product Helpline (023) 8049 4344.

A proof of purchase must be provided.

If upon inspection it is found that the fault occurring is due to defective materials or workmanship, 
repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months 
from the date of purchase except where tools are hired out when the guarantee period is 90 days 
from the date of purchase. The guarantee is extended to 24 months for parts only. This guarantee 
does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless 
or unsafe handling, alterations, accidents, or repairs attempted or made by any personnel other 
than the authorised Draper warranty repair agent.

Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will be 
quoted and made accordingly.

This guarantee applies in lieu of any other guarantee expressed or implied and variations of its 
terms are not authorised.

Your Draper guarantee is not effective unless you can produce upon request a dated receipt or 
invoice to verify your proof of purchase within the guarantee period.

Please note that this guarantee is an additional benefit and does not affect your statutory rights.

Draper Tools Limited.

Warning! 

Read the instruction manual.

12. DISPOSAL

12.1 DISPOSAL

–  At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is 

disposed of according to national regulations.

–  Contact your local authority for details of collection schemes in your area.

 

In all circumstances:

 

  Do not dispose of power tools with domestic waste.

 

  Do not incinerate.

 

  Do not abandon in the environment.

 

  Do not dispose of WEEE* as unsorted municipal waste.

*  Waste Electrical & Electronic Equipment.

11.1 EXPLANATION

11.  EXPLANATION OF SYMBOLS

WEEE
Do not dispose of Waste Electrical & Electronic 
Equipment in with domestic rubbish

Laser radiation.
Do not stare into beam
Class 2 laser product

Summary of Contents for 15102

















Reviews: