15
9. BASIC CIRCULAR SAW OPERATIONS
9.4 BEVEL ADJUSTMENT - FIG. 6
To alter the angle between 0° to 45° loosen locking
knob
.
NOTE: The scale is a guide. If more accuracy is
required a protractor should be used off the
underside of the base against the blade (only with
the plug removed from the socket). When angle is
set, secure locking knob
.
9.6 LASER GUIDE - FIG. 8
WARNING: Laser radiation. Do not stare into beam.
Class 2 laser product.
1. Mark the line of the cut on the workpiece.
2. Adjust the depth and/or bevel angles of the cut
as required.
3. Turn on the laser guide
by pressing button
and align the line of the cut on the
workpiece.
4. Plug in the machine and start the motor.
5. When the blade is at its maximum speed
(approx. 2 sec.) make the cut.
6. On completion of the cut, switch off the laser.
FIG.8
FIG.6
9.5 PARALLEL GUIDE - FIG. 7
Pass the parallel guide
through the pressings
in the base and secure with locking knob
.
Make a test cut on a scrap piece of timber prior to
making any cuts on the workpiece and adjust
accordingly. For accuracy measure between the
edge of the blade allowing for the kerf of the
blade and the parallel guide's face (only with the
plug removed from the socket).
FIG.7
