11
WARNING: Prior to beginning any drilling, carefully
check the surface for the presence of electric cable, gas
or water pipes and other dangerous or damaging
contents. If unsure do not proceed.
NOTE: Remove the plug from the socket before carrying
out adjustment, servicing or maintenance.
9.1 FUNCTION SELECTOR - FIGS. 2 - 3
FIG.2: Rotary/Hammer selector
Rotary Drill
Hammer Drill
FIG.3: Rotation/Stop selector
Rotation
Chisel
(Rotation stop)
9.2 ROTARY DRILLING
With the drill at standstill, position the rotary/ hammer
selection lever
to the right ( ). Rotate the
rotation/stop selector
to the left ( ).
This set-up is for standard drilling ie. into wood.
9.3 PNEUMATIC HAMMER DRILLING
With the drill at standstill, position the rotary/ hammer
selection lever
to the left ( ). Rotate the
rotation/stop selector
to the left ( ).
This set-up is for masonry drilling ie. into brick, concrete,
block work, etc.
9.4 PNEUMATIC CHISELLING
With the drill at standstill, position the rotary/ hammer
selection lever
to the left ( ). Rotate the
rotation/stop selector
to the right ( ).
This set-up is for chiselling with the chuck rotation stop
engaged ie. chiselling/chasing out brickwork,
plasterboard, etc.
9.5 TRIGGER SWITCH - FIG. 4
Select the required function. Pull trigger
to activate
the machine.
FIG.2
FIG.3
FIG.4
9. BASIC HAMMER DRILL OPERATIONS
