Draper 10773, User Instructions, Page: 11 / 20

8. SETTING THE SANDER
NOTE: Remove the plug from the socket before
carrying out adjustment, servicing or maintenance.
8.1 TOOL HOLDERS
The sander comes equipped with two sets of holders,
one for the bobbins when not in use, the other for
the table inserts.
8.2 BOBBIN STORAGE - FIG. 1
Place the bobbins onto the storage pins.
8.3 INSERTS STORAGE - FIG. 2
Place the inserts into the storage slots.
NOTE: Remove the plug from the socket before
carrying out adjustment, servicing or maintenance.
8.4 NO-VOLT ON/OFF SWITCH - FIG. 3
This machine is fitted with a no-volt type ON/OFF
switch.
In the event of a power supply disruption, the
machine will require manually restarting once power
has been returned.
To switch the machine on, press the green button
marked ‘I’.
To switch the machine off, press the red button
marked ‘O’.
FIG.1
FIG.2
FIG.3
11