8. Operating Instructions
2. While the clock is flashing, use the up (14) and down
(15) buttons to select the number of hours for which
the countdown will run.
Important: ONLY the hour value can be changed. The
maximum value is
23:00.
3. Once the desired value has been reached, allow the
display to time out and return to the default display.
Important: Once set, the shutdown timer is not
visible until it is initiated.
4. To initiate the shutdown timer, press the timer
countdown button (12).
5. The timer is shown on the LCD display and will count
down to
00:00.
6. When
00:00 is reached, the heater automatically
enters standby mode.
Important: Once initiated, the timer can only be reset by
completely switching off the heater. Any other action will
cause the heater to store the current timer value.
To pause the timer once initiated, press the timer
countdown button. To resume the countdown, press the
countdown timer button again.
To edit the timer once initiated, press the shutdown timer
button. The timer can be adjusted while the countdown is
active or paused. If the timer is adjusted while the
countdown is active, it will automatically resume once
the edit function has timed out.
Important: When edited during an active countdown,
the minutes value cannot be changed. To reset the
minute value to
00, allow the current timer to expire or
fully switch off the heater.
8.6 Using the Remote Control
10
Fig.
The heater is supplied with a remote control (D) with
buttons that are identical to those on the control panel
(8):
Button icon
Function
Decrease the target temperature or
shutdown timer value
Increase the target temperature or
shutdown timer value
Access the shutdown timer
configuration
Initiate the shutdown timer
Enable the lower heating element
Put the heater into or out of standby
mode
– 13 –
EN