25
800-523-6049 |
www.rldrake.com
Administration Panel
Admin Page
Change Username:
This section is used to change the Administrator’s username (16 characters maximum). The
username is used to log into the unit and allows the user to make changes to any area without going through the front-
panel LCD. To initate the change, all 3 fields in this section must be entered correctly. (Factory Default: “
admin
”)
First enter the administrator's current username, then type in a new username where it says “
Enter New Username
”.
The username is case-sensitive.
Once the second step is complete, the user must enter the same username exactly as entered in the second step above
in the field “
Enter New Username Again
” in order to to confirm the change. If the username doesn't match, an error
message will be displayed.
Change Password:
This section is used to change the Administrator's password (16 characters maximum). The
password is used to log into the unit and allows the user to make changes to any area without going through the front-
panel LCD. To initate the change, all 3 fields in this section must be entered correctly. (Factory Default: “
pass
”)
First enter the administrator's current password, then type in a new password where it says “
Enter New Password
”.
The password is case-sensitive and will not be displayed.
Once the second step is complete, the user must enter the same password exactly as entered in the second step above
in the field “
Enter New Password Again
” in order to to confirm the change. If the password doesn't match, an error
message will be displayed.
Click to apply your login credential changes.
All fields
MUST
be populated in order for any changes to be set upon clicking “Submit Change”.
Unchanged fields
MUST
be re-entered.
1
2
3
The “Admin” tab (Figure 11) allows the user to change or update the login credentials for the unit. Alpha-n symbols
are acceptable for use in both username and password.
Figure 11 - “Admin” Tab
2
3
1
