8
937.746.4556 |
www.rldrake.com
FRONT PANEL
Ethernet Control:
10/100 Ethernet wired connection for local and remote management
IP Reset Button:
When pressed for >2 seconds, the IP address of the control port will enable to the default factory
IP address (
172.16.70.1
,
Subnet Mask
255.255.255.0) The login credentials will also be enabled to the default
username
admin
and password
pass
.
Note:
The old IP address, login, and password will still be present in the encoder settings.
Status LEDs:
Provides a status of tasks performed by the PEG encoder in real-time:
Power:
The LED is illuminated when the power is ON.
Input:
The LED is illuminated when input video is being received from the HD/SD SDI or Composite input.
Encoding:
The LED is illuminated when the internal encoder is operational.
Output:
The LED is illuminated when the copper or optical SFP is connected to a network.
Front and Rear Panel Operation
REAR PANEL
NTSC Composite Video/Audio In:
Analog video with Left and Right Audio.
HD-SDI IN:
Digital video HD/SD SDI input source
SFP Ethernet Output:
Optical or Copper SFP IP video and audio output. (SFP sold separately)
5VDC Power Port:
Accepts five-volt power to the device
3
1
4
2
5
6
8
9
10
7
3
4
5
6
9
7
1
10
8
2
