21
800-523-6049
|
www.rldrake.com
Ethernet MAC Address:
indicates the MAC Address of the “Remote Control/Data 100/1000” Port.
Software Version:
indicates the software version of the unit.
FPGA Version:
indicates the current hardware version of the unit’s FPGA chipset.
QAM Version:
indicates the current software version of the unit’s QAM output module.
Hardware Version:
indicates the current hardware version of the unit.
Serial Number:
indicates the unit’s serial number.
Headend Name:
a user-defined field to make identification easier.
Location:
another user-defined field to make identification easier.
Login Timeout (Minutes):
indicates the period of time before the unit logs itself out if there is no activity on the web
screens. Options are 5, 15, 30, or 60 minutes. (Factory Default: "5" minutes)
Ethernet IP Address:
for details, see of the "Admin Tab" section.
Ethernet Subnet Mask:
for details, see of the "Admin Tab" section.
Ethernet Default Gateway:
for details, see of the "Admin Tab" section.
Unit Configuration
Figure 9 - Network Tab
1
2
5
3
6
4
7
8
9
10
15
11
16
12
17
Remember to click on the SAVE button to apply the new values/configurations.
Main Tab: Refresh Tab
The "Main Tab: Refresh Tab" can be clicked while you are on any of the following sub-tabs screens: "Status", "Video",
"Audio", "TS Config", "IP", "QAM", and "Output". When clicked, it will update all relevant fields/ parameters of the active
screen as that information is retrieved from the unit in a real time basis.
Network Tab
The "Network Tab" (Figure 9) is a "read and write" screen where the following parameters are displayed and configured:
1
2
4
6
8
10
12
3
5
7
9
11
