5
5.
To lock the screen in place, close and tighten the Locking
Screw on the mounting brackets. This will keep the screen
locked firmly in place.
Installing the hanging bracket:
1.
Choose tapping screws with hangers, or other screws with hangers (not included) according to your ceiling material.
2.
Drill two identical holes with an electric drill. Make sure the holes
are aligned horizontally with the wall. Fasten hangers
(not provided) into the ceiling.
3.
Use the Ceiling Hanging Screws (F) provided with the accessory
package to fix the Ceiling Hanger (E) into the Floating Mount Bracket (A).
Ensure the screws on the bracket are tightened and secure.
4.
Follow steps three through five from the “Installing the bracket on
the wall or ceiling” section to attach the casing to the brackets. After
the casing is locked into the brackets, hang the screen on to the hooks.
IR REMOTE INSTRUCTIONS
1.
To raise the screen, push “UP”
2.
To lower the screen, push “DOWN”
3.
To hold the screen at desired position, push “STOP”
4.
To raise the screen with micro adjustments, push “MICRO-UP”
5.
To lower the screen with micro adjustments, push “MICRO-DOWN”
UP
STOP
DOWN
MICRO-DOWN
MICRO-UP
LED Remote Controller
Caution:
- The shortest distance between receiver and controller is 0.5 meter
- Controller will work within 30 degrees horizontally from the center
of the IR receiver within 30 feet from screen
- The controller will not work if the signal is covered
- Avoid high temperatures and high humidity
- Change the batteries when the signal is weak using (2) AAA,
and take the batteries out of the controller when not being used
for long periods of time
How to install the batteries:
1. Turn the controller over, push to open
the cover as guide arrow indicates.
2. Put batteries in according to guide
3. Close the cover
