DF-SL-92-145 Installation Manual
© 2016 Dragonfly
Dragonfly Fixed Screen Assembly Instructions
Step 1. Unpack the Screen
A. Lay out all the parts on a clean, flat surface.
B. To avoid stains or damage, do not unpack the screen material at this time.
Package Contents
Snap Lugs
(see below, +2 extra)
5x40mm Phillips
Head Screws (8)
Concrete
Anchors (8)
Tethered Mounting
Bracket (1)
Screen Material
(1)
L Bracket
Assembly (4)
Screen Frame
(2 short, 2 long)
Tensioning Rod
(2 short, 2 long)
Step 2. Install the Snap Lugs in the Frame
The snap lugs hold the screen material in place on the frame. Slide one lug into place at each arrow decal on
the frame. Two spare lugs are included; do not install them unless needed.
Screen Size
Lugs Used
Screen Size
Lugs Used
84"
22
110"
28
92"
24
120"
30
100"
28
133"
34
106"
28
145"
38
Step 3. Assemble the Frame
A carpenter’s square is very helpful for this step.
A. Place all of the frame tubes face down on a flat, clean work surface and line up the ends to form the shape
of the finished screen.
B. Loosen the screws on the L-bracket assemblies, then carefully slip the brackets into the aluminum frame
channel.
C. Work around the frame several times, using the square to align the frame corners and tightening the
screws a little each time.
L-Bracket
Top Frame
Side Frame
