DragonFire
For further assistance please contact us at
, or by phone at
1-800-708-9803.
Note: Figure D
shows the Windshield Light properly installed.
Step 4:
Inspect & ensure that rocker switch is properly wired as shown on
(Figure E
)
Step 5:
Install rocker switch, then hook up the Red Wire (+), and Black Wire (-) to the battery. Wire harness comes with a 5 Amp
in-line fuse.
Note:
Figure F
shows the Rocker Switch properly installed.
This completes the Windshield Light installation.
Ground
Power
In
Power Out To Light
