Al
t
hough
t
his transceiver is designed mainly for mobile use, you can use it as a base station with an AC
power source, For base station installation, you need these items.
*
12-volts
DC power supply tha
t
can supply at least 10 amps.
Caution
:
Most
12-volt
DC power supplies plug into a standard AC outlet to produce DC power. Before
connecting your Radio to a
1
2-volt DC power supply, read and follow the instruc
t
ions included wi
t
h the
power supply.
* Base station antenna
* Coaxial antenna cable and connectors
* External
8-ohm
speaker
Follow these s
t
eps to install the transceiver as a base station.
1. Mount the base station an
t
enna as a described in its owner's
manual.
Warning
:
Use extreme caution when you install or remove a base
sta
t
ion antenna. If the antenna s
t
arts to fall, let i
t
go, It could contac
t
overhead power lines. If the antenna touches a power line, con
t
act
with the antenna, mast, cable, or guy wires can cause elec
t
rocution and death. Call the power company to
remove the antenna. DO NOT attempt to do so yourself.
2. Connect the antenna
t
o the ANT jack on the back of the transceiver.
3. Connect the transceiver's black power wire to the nega
t
ive
(-)
terminal on the DC power supply.
4
.
Connect the transceiver's red wire (with the in-line fuse) to the positive
(+)
terminal on the DC power
supply.
5. Connect the DC power supply to a standard AC outle
t
.
RADIO FUNCTIONS
1
. POWER ON/OFF SWITCH
Turns radio on and OFF and adjusts
volume.
2. MICROPHONE INPUT
6 pin socket for push-to-talk microphone.
3.
RF
GAIN CONTROL
Control the receiver sensitivity to reduce interference. To decrease RF gain, turn the knob counter
clockwise. For the maximum receiver sensitivity, the RF GAIN control must be rotated to extreme
clockwise.
4.
MIC
GAIN CONTROL
This control provides the proper or desired modulation,
5.
STEP/NB/MEMORY 1
SWITCH
FUNCTION OFF
;
STEP FUNCTION - This switch is used for select one of the frequency step
:
1 KHz
/
10KHz
/
100KHz