background image

Installation and adjustment instructions 

Terrace awning Family EVO

Document name: 2010 EN Instrukcja Family EVO 2,11  |  date: 08.07.2010  |  page: 1 / 11

Installation instructions and regulations

Terrace awning Family EVO

1.1.

Safety Tips

CAUTION!

To ensure safety it is important to read this instruction cafefully.
This instruction of montage should be kept, and in case of reselling the awning, 
passed to another user.

Information

It is required to take safety measures to prevent accident while working at 

heights.

A ladder or scaffolding shall be so positioned as to ensure its stability during 

use. 

Iit is necessary to possess required qualifications to work at heights.

1.2.

Content of delivery.

1x awning: Family EVO

Ordered types of monting brackets (wall          and ceiling            ) an amount consistent with table:

Dimensions (cm)

Width: 200 - 360

Width: 361 - 470

Width: 471 - 520

Width: 521 - 610

Depth: 150 - 200

2

3

3

4

Depth: 250 - 350

3

3

4

4

1x "installation and adjustment instructions"

1x "use and maintenance manual, guarantee"

1x "instruction for connection and adjustment of the electric motor" (for awnings with electric motor)

1x "instruction for remote control and/or weather sensor" (for awnings with this equiptment)

1x crank (for awnings with manual drive or NHK*)

1x cord for the test run and/or programming the engine (additionally ordered)

1.3.

General guidlines

CAUTION!

Montage of the awning should be performed by a specialised company. Depending on 
the conditions of the monting surface, proper means/tools should be used for 
montage. Company/personel performing the montage is responsible for proper 
selection of montage method and tools.

Information

The awning is supplied without montage materials. The components of this awning, 
conform with the requirement and rules of technique. Changes in construction is 
possible only by DRAGON, Korgul, Prochowski Sp. J. premission.

1.4.

Qualifications of the specialized service.

complies with safety guidelines provided/required by local law

Is qualified and has experience in using ladders and/or scaffolding

takes responsibility of transport and proper storing

has experience in using tools and equiptment

has a permition/license for usage of montage methods, tools and equiptment

Summary of Contents for Family EVO












Reviews: