16 Maintenance
© Travis Industries
4131113
100-01356
Accent Light Replacement
Accent lights are included in your fireplace to provide additional lighting. These bulbs will burn out over
time. To replace, follow the directions below:
•
Shut off gas to the fireplace and let it cool for 15 minutes.
•
Turn off electricity to the fireplace (disable the breaker).
•
Remove the glass (see page 21) and logs (see instructions included with logs).
•
Replace the halogen bulbs with the following bulbs:
35 Watt 240 Volt T4 Halogen Bulb (G6.35 Base)
Lower Bulbs
−
Located behind the logs on the EmberFyre and DancingFyre Burners.
−
Located below the media tray (firebox floor) on the DiamondFyre Burner.
Remove the bulb from the socket as shown above.
(
NOTE
: .Take care to not touch the bulb with your fingers – use foam packing or paper towel to hold the bulb):
Upper Bulb
1. Remove the exhaust manifold from the roof of the fireback. The 2 rear screws are in slots, and do not
need to be removed. Remove the 2 front screws from the exhaust manifold, then tilt the manifold
down and slide it forward to remove.
