Dragon Touch InstantFun 2, User Manual

Page: 6 / 50

4
Note:
• The size of the thermal print paper is 2 1/4” × 50’ (58mm × 15m). We highly
recommend you purchase printer paper refills from the product manufacturer
to ensure proper function.
• For best results, the camera should be turned on and allowed to warm up for
a few minutes before printing photos.
2. Inserting microSD Card
This camera can instantly print a photo without a microSD card, but if you want to
save photos and videos, you must install a microSD card (not included) in the
microSD card slot. This camera supports up to 32GB memory cards. The memory
cards must be formatted before use.
Note: This camera can only support an up to 32GB memory card.
3. Charging and Powering On
Connect the USB Type-C cable to the USB Type-C port on the camera and plug the
cable into a powered USB port. The indicator light will turn red when it is charging.
The light will turn off when it is fully charged. When the charging is done, press and
hold the to turn on the camera.
Note: Charging the camera must be done with adult supervision.
4. Taking Photos and Recording Videos
After turning the camera on, it is in photo mode. Press and hold the to switch
between the photo and video mode.
In the photo mode, press the to take photos.
In the video mode, press the to start recording video and press it again to end
recording.
EN