
www.dragino.com
LPS8 LoRaWAN Gateway User Manual
9 / 50
2
Access and Configure LPS8
The LPS8 is configured as a WiFi Access Point by factory default. You can access and configure the
LPS8 after connecting to its WiFi network, or via its WAN Ethernet port.
2.1
Find IP address of LPS8
2.1.1
Connect via WiFi
At the first boot of LPS8, it will auto generate a WiFi network
called
dragino-xxxxxx
with password:
dragino
You can use a PC to connect to this WiFi network. The PC will
get an IP address 10.130.1.xxx and the LPS8 has the default IP
10.130.1.1
2.1.2
Connect via Ethernet with DHCP IP from router
Alternatively, connect the LPS8 Ethernet port to your router and LPS8 can obtain an IP address
from your router. In the router’s management portal, you should be able to find what IP address
the router has assigned to the LPS8. You can also use this IP to connect.