www.dragino.com
LGT-92 LoRa GPS Tracker User Manual
22 / 40
Below are the available commands, a more detail AT Command manual can be found at
AT+<CMD>? : Help on <CMD>
AT+<CMD> : Run <CMD>
AT+<CMD>=<value> : Set the value
AT+<CMD>=? : Get the value
General Command
AT: Attention
AT?: Short Help
ATZ: MCU Reset
AT+TDC: Application Data Transmission Interval
Keys,IDs and EUIs management
AT+APPEUI: Application EUI
AT+APPKEY: Application Key
AT+APPSKEY: Application Session Key
AT+DADDR: Device Address
AT+DEUI: Device EUI
AT+NWKID: Network ID(You can enter this command change only after successful network
connection)
AT+NWKSKEY: Network Session Key
Joining and sending date on LoRa? network
AT+CFM: Confirm Mode
AT+CFS: Confirm Status
AT+JOIN: Join LoRa? Network
AT+NJM: LoRa? Network Join Mode
AT+NJS: LoRa? Network Join Status
AT+RECV: Print Last Received Data in Raw Format
AT+RECVB: Print Last Received Data in Binary Format
AT+SEND: Send Text Data
AT+SENB: Send Hexadecimal Data
LoRa network management
AT+ADR: Adaptive Rate
AT+CLASS: LoRa Class(Currently only support class A
AT+DCS: Duty Cycle Setting
AT+DR: Data Rate (Can Only be Modified after ADR=0)
AT+FCD: Frame Counter Downlink
AT+FCU: Frame Counter Uplink
AT+JN1DL: Join Accept Delay1
