Dräger REGARD 2400, Instructions For Use Manual, Page: 59 / 240

Dräger REGARD 2400/2410 59
Configuration software
12.4.2 Logger data quantity
Fig. 19
The quantity of data to be stored is selected here.
12.5 COM ports
In the menu File – COM Port the communication settings between the PC and the controller
are defined, see “Configuration information menu” on page 51.
12.6 Program transfer to the REGARD 2400/2410
To send a configuration to the REGARD 2400/2410, the password " 1875 " must be entered.
In the information window it is pointed out that the relay settings may change and an alarm can
be triggered. By loading a new configuration, the datalogger can be reset.
12.7 Special function
In the menu Function – Special Function special functions are selected. After entry of the
password " 1875 " inhibit, average value and relay test can be activated.
12.8 Online monitor
In the menu Function – Monitor current measured values and alarms of the REGARD 2400/
2410 are displayed. The green LED indicates normal operation. The red LED indicates an event
(alarm, fault).
02233025_en.eps