How do I start the Vehicle?
1. Wait 15 minutes after eating, drinking, smoking or using
alcohol-based products. It is also recommended to rinse
the mouth with water before providing a breath test.
2. Ensure a clean mouthpiece is inserted properly into the
Dräger Interlock® 7XXX.
3. Switch the ignition on.
4. The display will show “Ready for test – Please blow”.
5. Take a deep breath and blow steadily into the
mouthpiece.
6. During the test you will hear the device click three times.
After the third click briefly suck back. The coloured
LEDs and the display will indicate that the breath test is
complete.
The Dräger Interlock® 7XXX will display the following
messages if the blow pattern is correct:
– “
Test passed
” – A green LED confirms the result and
the vehicle can be started.
– “
Test failed
” – A red LED confirms the result. In this
case, the vehicle cannot be started.
What if I fail the initial test?
After a failed initial breath test due to detection of alcohol,
the vehicle will not start and a “
Temporary Lockout
” will
be activated.
A countdown will show on the display the amount of time
remaining before another breath test can be presented.
Once the temporary lockout period has expired, repeat
steps 3 – 6 under “
How do I start the vehicle
” to present
another breath test.
In case mouth alcohol is detected, the message
“
Interferent detected – Repeat test
” will appear.
Press the “
OK
” button, rinse the mouth with water and take
a new test.
www.draeger.com/interlockqld
