Dräger Flame 2100, Instructions For Use Manual

Page: 5 / 146

5
For your safety
en
1 For your safety
1.1 General safety statements

Before using this product, carefully read the instructions for use.

Strictly follow the instructions for use. The user must fully
understand and strictly observe the instructions. Use the product
only for the purposes specified in the intended use section of this
document.

Do not dispose of the instructions for use. Ensure that they are
retained and appropriately used by the product user.

Only trained and competent users are permitted to use this
product.

Comply with all local and national rules and regulations associated
with this product.

Only trained and competent personnel who are familiar with local
codes and practice are permitted to inspect, repair, and service the
product as detailed in these instructions for use (see chapter 5 on
page 18). Further maintenance work that is not detailed in these
instructions for use must only be carried out by Dräger or
personnel qualified by Dräger. Dräger recommends a Dräger
service contract for all maintenance activities.

Only use genuine Dräger accessories, or the proper functioning of
the product may be impaired.

Do not use a faulty or incomplete product, and do not modify the
product.

Notify Dräger in the event of any component fault or failure.
1.2 Definitions of alert icons
The following alert icons are used in this document to provide and
highlight areas of the associated text that require greater awareness
by the user. A definition of the meaning of each icon is as follows:
NOTICE
Indicates a potentially hazardous situation which, if not avoided, could
result in damage to the product or environment.
2 Description
2.1 Product overview
► Illustration on the fold-out page (Figure A)
1 Reflector and bulb for internal tests
2 Status LED
3 Detector window
4 Sensor
5 Cable entry, closed with a blind plug
6 Cable entry, closed with a protective cap
7 Target point for testing