D
-5755-2018
Dräger Babylog
®
V-Series
Dräger Neonatal Flow Sensor
Disinfection
Disinfection
At the beginning of the contact time, swirl the components back and forth at least 3 times. Make sure the disinfectant
reaches all surfaces and interiors. At the end of the contact time, swirl the components back and forth again
at least 3 times.
After the contact time, rinse the components in the water bath (at least drinking water quality) until no disinfectant residue is visible.
Place the components in the disinfectant. Observe the specified contact time.
Shake out residual water carefully.
Allow the components to dry com-
pletely.
Manufacturer:
Drägerwerk AG & Co. KGaA
Moislinger Allee 53–55
23558 Lübeck, Germany
This guideline does not replace or amend the instructions for use. Please always refer to the
reprocessing instruction in the latest instruction for use of the components. The instructions
for use and the hospital guidelines and policies always have to be observed.
