6
2.5
Place the ground clamp (4117792) on the rear edge of the drawer - oriented as shown
in Figure 4, and mark its location.
2.6
Remove the paint from the drawer where the clamp set screws will contact bare
metal when the clamp is installed.
2.7
Install the clamp and tighten the set screws; use Loctite #222 on the threads.
FIGURE 4. Ground Clamp Installation
2.8
Attach one end of the ground strap assembly to the right rear stud projecting through
the battery shield, and secure it with a 10-32 Kep nut. See Figure 6.
2.9
Attach the other end of the ground strap assembly to the ground strap bracket as
shown in Figure 5. Secure it with a 10-32 Kep nut.
2.10 Pull the drawer tracks out. While holding the drawer in position, attach the ground
strap bracket (4117791) to the ground clamp with two 6-32 x 1/4 in. btn hd skt screws
and #6 int-t lock washers. See Figure 5.
SP24404
DRAWER
SET SCREWS
GROUND CLAMP
1 1/4"±1/16"
INSIDE
DRAWER
FACE
Installation Procedure (continued)
RETURN TO CD-ROM TABLE OF CONTENTS
