, JMS, 2-12-2011
Operating instructions
The shear must always be guided flat and the best
cutting result is achieved, when the jaws pos. 10 are
positioned flat on top of the material, also when
cutting circular cuts.
The material to be cut must always be free of oil or
grease.
Always place the machine flat on the workpiece.
Cut-outs:
Drill a starting hole with a 12-14 mm
diameter drill.
Circular cuts:
Always cut counter clockwise and
from left to right.
Warning!
Important instructions for connecting a
new 3-pin plug to the 2 wire cable.
The wires in the cable are coloured according to
the following code
live
= brown
To be fitted by qualified professional only
neutral =
blue
Do
not
connect the blue or brown wire to the
earth terminal of the plug.
Care and Maintenance
Guarantee
Before working on machine disconnect
from power supply by removing plug from socket.
Always keep the machine and the ventilation slots
clean.
Oil the knife pin
18
at regular intervals.
If the machine should happen to fail despite the
care taken in manufacture and testing, repair
should be carried out by an authorised customer
services agent for Dräco power tools.
Dräco tools carry a guarantee of 12 months from
date of delivery.
Damage attributable to normal wear and tear,
overload or improper handling will be excluded
from the guarantee.
In case of complaint please send the machine,
undismantled
, to your dealer or the Dräco
Service Centre for electric power tools.
Important
If for any reason the plug is cut off of the cable of
this machine, it must de disposed of safely and
not left unattended.
Declaration of conformity
Environmental protection
We declare under our sole responsibility that this product is in
conformity with the following standards.
EG 98/37 EG, EG 73/ 23 EG, EG 89/336 EG, or standardisation
documents EN 292 part I, EN 292 part II, EN 50 144, EN 55 014,
EN 60 555, HD 400, HD 400.3 part II/H
09 Susanne Draenert
Recycling raw materials instead of
waste disposal
Machine, accessories and packaging should be
sorted for environment-friendly recycling.
These instructions are printed on recycling paper
manufactured without chlorine
®
Operating Instructions for the universal shear UVS-1
To avoid any disturbance please read the following instructions:
For your safety:
1
2
3
4
5
1 Safe operation of this machine is possible only
when the operating instructions and the safety
precautions are read completely and the
instructions contained therein are strictly observed.
2
The machine must not be used when damp and must
not be operated in a wet environment.
3
Always inspect cable and plug before using machine.
Only have damage repaired by a qualified professional.
Put the plug into the mains socket only when the
machine is switched off.
4+5
Always wears protective goggles, protective gloves
and heavy-duty shoes when working.
l
Do not carry the machine by the cable.
l
Always remove the plug from the power supply
socket before carrying out any work on the
machine, when interrupting work and when not
using the machine.
l
Always place the cable to the rear away from
the machine.
l
Apply the machine to the sheet metal only when
switched on.
l
Always provide for secure footing when
working.
l
Firmly clamp the workpiece if it dose not remain
stationary from its own weight.
l
The knife should not rub on the jaws: Possible
danger of cutting tool breakage.
l
Do not exceed the maximum allowable material
thickness especially when cutting over doublers,
folded joints or welded seams.
F
For further notes on safety refer to enclosed sheet
Technical Data:
DRÄCO Universal Shear UVS
UVS-1
UVS-1
max. cutting capacity
Art.no.
61340-1
spare parts
steel
400 N/mm²
mm/ga.
1,0 / 19
knife UVS standard
07014
stainless steel
600 N/mm²
mm/ga.
0,7 / 23
knife UVS serrated
07016
stainless steel
800 N/mm²
mm/ga.
0,5 / 25
set of jaws
13574/1
non ferro
250 N/mm²
mm/ga.
1,3 / 18
knife-pin set
12555
Sowaflex ®
mm
5,0
optional accessories
PU, ABS etc., plastics
mm
3,0-5,0
metal-box
18000
cardboard etc.
mm
6,0
adjustable guide S/01 up to 100 mm 10059
sealing materials
mm
6,0
adjustable guide S/01 up to 250 mm
10060
tightest radius plastics
mm/ “
30 / 1¼
adjustable guide S/01 up to 500 mm
10061
tightest radius metal
mm/ “
50 / 2
support roller
10076
strokes
min
-1
3000
adjustable guide S/02 up to 100 mm 20062
motor capacity
Watts
200
adjustable guide S/02 up to 250 mm
20063
weight
kg
1,6
adjustable guide S/02 up to 500 mm
20064
all units are ready to use
other voltages available
