DR
®
TRIMMER/MOWER
™
Safety & Operating Instructions
19
5.
Loosen idler pulleys #1 and #2
(Figure
29).
Remove the bracket from idler
pulley #1 in order to remove the belt.
6.
Remove the belt.
7.
Install the new belt. Make sure the
belt is on the INSIDE of idler pulley
#2, the OUTSIDE of idler pulley #1
and correctly fitted around the engine
pulley. Please refer to Figure 25 for
proper belt placement.
8.
Replace the bracket on idler pulley #1
and tighten both pulleys
(Figure 29).
9.
Replace the lower bearing housing
plate and tighten the four set screws
(Figure 27)
. Do not over tighten the
set screws
10.
Reinstall the bottom shield. See
page 17.
11.
Reinstall the stone guard flap. See
page 17.
12.
Reinstall the Mow-Ball
™
Support
assembly. See page 15.
Figure 29
Figure 30
Summary of Contents for Trimmer/Mower Sprint
