background image

CONTACT US AT 

www.DRpower.com

          3

 

Read this safety & operating Instructions manual before you use the DR STUMP GRINDER.  Become familiar with the operation 
and service recommendations to ensure the best performance from your machine. If you have any questions or need assistance, 
please contact us at www.DRpower.com or call toll-free 1-800-DR-OWNER (376-9637) and one of our Technical Support 
Representatives will be happy to help you. 

This is a high-powered machine, with moving parts operating with high energy.  You must operate the machine safely.  Unsafe 
operation can create a number of hazards for you, as well as anyone else in the nearby area.  Always take the following precautions 
when using this machine: 

 

Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people, their property, and 
themselves. 

 

Always wear protective goggles or safety glasses with side shields while using the STUMP GRINDER to protect your eyes from 
possible thrown debris. 

 

Avoid wearing loose clothing or jewelry, which can catch on moving parts. 

 

We recommend wearing gloves while using the STUMP GRINDER.  Be sure your gloves fit properly and do not have loose 
cuffs or drawstrings. 

 

Wear shoes with non-slip treads when using your STUMP GRINDER.  If you have safety shoes, we recommend wearing them.  
Do not use the machine while barefoot or wearing open sandals. 

 

Wear long pants while operating the STUMP GRINDER. 

 

Use ear protectors or ear plugs rated for at least 20 dba to protect your hearing. 

 

Keep bystanders at least 50 feet away from your work area at all times.  Stop the engine when another person or pet 
approaches. 

Chapter 1: General Safety Rules 

Labels 

Your DR STUMP GRINDER carries prominent labels as reminders for its proper and safe use.  Shown below are copies of all the 
Safety and Information labels that appear on the equipment. Take a moment to study them and make a note of their location on 
your STUMP GRINDER as you set up and before you operate the unit. Replace damaged or missing safety and information labels 
immediately. 

Protecting Yourself and Those Around You 

#15345 

#23545 

#13758 

#25709 

#18887 

#26488 

#19320 

Summary of Contents for Stump Grinder

































Reviews: