background image

18

 

        

DR

®

 

RV340 ENGINE

 

 

Country Home Products, Inc (CHP) Engine Owner Warranty Policy 

Terms and Conditions 

The DR

 RV340 ENGINE is warranted for two (2) years against defects in materials or workmanship when put to ordinary and normal 

consumer use; one (1) year for commercial use. 
For the purposes of all the above warranties, “ordinary and normal consumer use” refers to non-commercial residential use and does not 
include misuse, accidents or damage due to inadequate maintenance. 

DR Power Equipment certifies that the DR

 RV340 ENGINE is fit for ordinary purposes for which a product of this type is used. DR Power 

Equipment however, limits the implied warranties of merchantability and fitness in duration to a period of two (2) years in consumer use, 
one (1) year for commercial use.

 

The 2-Year Limited Warranty on the DR

 RV340 ENGINE starts on the date the machine ships from our factory. The 2-Year Limited 

Warranty is applicable only to the original owner. 

The warranty holder is responsible for the performance of the required maintenance as defined by the manufacturer's owner's manuals. The 
warranty holder is responsible for replacement of normally wearing parts such as the Air Filter and Spark Plug. Accessories to the machine 
are not covered by this warranty. 

During the warranty period, the warranty holder is responsible for the engine transportation charges, if required. During the warranty 
period, warranty parts will be shipped by standard method at no charge to the warranty holder. Expedited shipping of warranty parts is the 
responsibility of the warranty holder. 

SOME STATES DO NOT ALLOW LIMITATIONS ON THE LENGTH OF IMPLIED WARRANTIES, SO THE ABOVE LIMITATIONS MAY NOT 
APPLY TO YOU.

 

DR Power Equipment shall not be liable under any circumstances for any incidental or consequential damages or expenses of any kind, 
including, but not limited to, cost of equipment rentals, loss of profit, or cost of hiring services to perform tasks normally performed by the 
DR

 RV340 ENGINE. 

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE 
LIMITATIONS MAY NOT APPLY TO YOU. 

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO 
STATE. 

This Engine is manufactured for CHP by 

Chongqing Rato Power Manufacturing Corporation (RATO)

.  If you have any questions 

please visit www.DRPower.com or call 1-800-DR-OWNER (376-9637). 

Combined Exhaust and Evaporative Emissions Control Warranty Statement 

 
YOUR WARRANTY RIGHTS AND OBLIGATIONS 
 
The California Air Resources Board, the United States Environmental Protection Agency and Chongqing Rato Power 
Manufacturing Corporation (RATO), are pleased to explain the emission control system warranty on your 2014-2015 model 
year small off-road engine/equipment.  In the United States and California, new small off-road engine/equipments must be 
designed, built and equipped to meet the State's stringent anti smog standards. RATO must warrant the emission control 
system on your small off-road engine/equipment for the periods of time listed below provided there has been no abuse, 
neglect or improper maintenance of your small off-road engine/equipment. 
 
Your emission control system may include parts such as the carburetor or fuel injection system, the ignition system, catalytic 
converter, fuel tanks, fuel lines, fuel caps, valves, canisters, filters, vapor hoses, clamps, connectors, belts, and other 
associated components. For engines less than or equal to 80 cc, only the fuel tank is subject to the evaporative emission 
control warranty requirements of this section. (California only) 
 
Where a warrantable condition exists, RATO will repair your small off-road engine/equipment at no cost to you including 
diagnosis, parts and labor. 
 
MANUFACTURER'S WARRANTY COVERAGE: 
 

Summary of Contents for RV340





















Reviews: