background image

 

DR

 

ALL-TERRAIN

 

FIELD and BRUSH MOWER Safety & Operating Instructions

 

3

 

Chapter 2: Safety Considerations 

Taking the time to read and observe all safety instructions will ensure many years of 
productive use from your DR

 

ALL-TERRAIN

  

FIELD and BRUSH

 

MOWER and 

help you avoid injury. Please take a few moments to read the following guidelines for safely 
operating your new machine. 

Preparing to Use the DR

 

ALL-TERRAIN

  

FIELD 

and BRUSH

 

MOWER 

■ 

Read these 

Safety and Operating Instructions

 and the engine manufacturer’s owner’s manual 

before you use the DR

 

ALL-TERRAIN

  

FIELD and BRUSH

 

MOWER. Become 

familiar with the controls, engine and service recommendations to ensure the best 
performance from your machine. 

■ 

Inspect the area in which you will be working. Look for rocks, logs, sticks, rope, wire, 
garden tools, etc., and remove these objects before mowing. Mowing over these objects 
could damage the machine and cause injury. 

Safety Information Labels 

Take some time to become familiar with the following standard safety cautions applicable 
to your mower. Replace damaged or missing safety labels immediately. (#148231) 

 

 
 

 
 
  

 

 
 

 

 
 
 
 
 

Keep combustible substances away from 

the engine when it is hot. (#136841) 

Make sure you add oil before starting the 
engine; the unit is shipped without oil. 
Fill the oil reservoir slowly to make sure 

you don’t overfill it. (#127811) 

Use caution operating the 

machine on slopes. 

Keep body parts away 

from the mower blade. 

Always wear safety glasses 
or goggles while operating 
the machine.

Remove all objects 
that could be thrown 
by the mower blade.

Do not operate the 
machine near people 
or animals.

Read the Safety and 
Operating Instructions

 

Summary of Contents for ALL-TERRAIN















































Reviews: