DR 8157 Safety, Operation & Maintenance Instructions Download Page 28

 

 

WARRANTY 

 

The DR

®

 SNOW THROWER is warranted for one (1) year against defects in materials or 

workmanship when put to ordinary and normal consumer use (ninety (90) days for any other use). 

The Limited 1-Year Warranty on the DR

®

 SNOW THROWER starts from the original ship date of the 

machine.  The Limited 1-Year Warranty is applicable only to the original owner. 

The owner is responsible for the performance of the required maintenance as defined by the 
manufacturer's owner's manual.  The owner is responsible for replacement of wearable items such as 
shear bolts, skid shoes, cutting edge, bearings, chain, and belt, that are not covered under this warranty. 

Country Home Products, Inc. certifies that the DR

®

 SNOW THROWER is fit for ordinary purposes for 

which a product of this type is used.  Country Home Products, Inc. however, limits the implied 
warranties of merchantability and fitness in duration to a period of one (1) year in consumer use, 
ninety (90) days in any other use. 

SOME STATES DO NOT ALLOW LIMITATIONS ON THE LENGTH OF IMPLIED WARRANTIES, SO THE ABOVE 

LIMITATIONS MAY NOT APPLY TO YOU. 

FOR WARRANTY SERVICE 

Contact Country Home Products, Inc., which reserves the right to examine the machine and make its 
own evaluation at its option.  

CUSTOMER SERVICE HOTLINE 

Country Home Products, Inc.’s objective is to have 100% satisfied customers.  For that reason, we 
operate a 7-day-a-week Customer Service Department for our Owners.  You can access a 
Representative by dialing our 

TOLL-FREE

 

Hotline at 1(800)DR-OWNER (376-9637)

.  The sole 

job of our well-trained and friendly folks is to ensure that you get any help you need in a timely 
fashion.  They are there to answer all your questions including (1) inquiries on any of the above 
warranties, (2) inquiries about replacement parts, or (3) your questions regarding service, maintenance 
and operation. 

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU ALSO HAVE OTHER 
RIGHTS, WHICH VARY FROM STATE TO STATE. 

 
 
 
 
 
 

 

COUNTRY HOME PRODUCTS

®

 

Meigs Road, P.O. Box 25, Vergennes, Vermont 05491 

TOLL-FREE 1(800)DR-OWNER(376-9637) • www.dr-owner.com 

 

©2001 CHP, Inc. 157581           Printed in Canada

 

Summary of Contents for 8157





























Reviews: