CONTACT US AT
www.DRpower.com
7
Specifications
Engine
725 Series Briggs and Stratton. See your Engine owner’s manual for detailed Engine Specifications
Cutting Width
22"
Cutting Heights
3" to 6" in 1/2" increments
Cord Tip Speed (mph)
230
Cord Size
0.155" (Blue) or 0.175" (Green)
Offset Maximum Reach
45" nominally, 60" or 72" in offset position
Frame
11 Gauge Steel, Painted
Spindle Housing
Cast Aluminum
Drive Belt
3L x 77", Aramid Reinforced
Cord Line Plates
Cast Aluminum
Mow-Ball
Heat, Impact, and UV-Resistant Polymer
Wheels
9" Diameter x 3.5" Wide
Hitch Type (pin/ball)
1/2" diameter clevis pin; 2" Ball Hitch Compatible w/ Additional Kit
Hitch Height
6" - 21" in 1.5" increments
Machine Dimensions
81" L x 60" W x 23" H
Machine Weight
262 lbs.
Ground Clearance
4" minimum
Tow Bar Length
40"
ASSEMBLY
Hardware Bag Parts (Figure 2 and Table Below)
Item
Part
no.
Description
QTY
1 ........ 34326 .......... Bolt, Hex, Flange, GR8, 3/8-16 x 3" LG .................... 2
2 ........ 16003 .......... Pin, Hitch Clip, 1/2" To 9/16", .12" Wire ................. 1
3 ........ 10179 .......... Washer, Flat, 1/2" ..................................................... 1
4 ........ 18737 .......... Pin, Clevis, 1/2" OD x 4.5" LG .................................. 1
5 ........ 18081 .......... Washer, Lock, 3/8" .................................................... 2
Compare the contents of the Hardware Bag with the list above and Figure 1. If
you have any questions please contact us at www.DRpower.com or call 1-800-
DR-OWNER (376-9637) for assistance.
Tools Needed:
9/16" Wrench
3/4" Wrench
1.
Position the Tow Bar Assembly onto the Pivot Assembly and secure with two
Flange Bolts and Lock Washers using a 9/16" Wrench (
Figure 3
).
5
Figure 2
3
2
1
4
Pivot Assembly
Figure 3
Tow Bar Assembly
Flange Bolts and
Lock Washers
