Output Tubes
1 - 6V6
Preamp Tubes
1 - 12AX7
, 1 - 12AT7
Rec�fier
Solid State
Controls
Dwell, Mix, Tone, Ground Li�
Configura�ons
Head
Colors
Black, Blonde, Red, Silver
Dimension & Weight
17
3⁄4” W x 10“ H x 9 3⁄4” D, 19 lbs.
Bust out the sur�oards boys and girls…�me to ride the crest of the Z Verb! Dr Z’s first all
tube spring reverb unit is finally here. The Z Verb will handle all of your reverbera�on needs.
Anything from subtle ambience to full on space explora�on…the Z Verb can do it. With a
classic 3 knob set up (Dwell, Mix, and Tone) you can control all parameters of your reverb.
The included footswitch let’s you turn the unit on and off when needed. The Z Verb is equally
at home with a Dr Z Amp as it is paired with another fine company’s amp. You’ll find it works
excep�onally well with the built in effects loop on some Z models as well as plugged into the
front end. All hand wired right here in Cleveland Ohio, the Z Verb is a must for any true con
-
noissuer of fine tube driven spring reverb.
General Informa�on
Specifica�ons
*Note: Using the Z-Verb with an amplifier’s effects loop will achieve the best results. If an effects loop is not
available we recommend not stacking the Z-Verb on top of your amplifier. This may cause hum as the
result of an interaction between the Z-Verb’s reverb tank and the electromagnetic field emitted
from an amp’s power transformer. This is not always the case but if you experience this problem,
simply remove the Z-Verb from the top of your amp and the hum will go away.
