Copyright © 2001-2013, Dr Robot Inc. All Rights Reserved.
www.DrRobot.com
- 8 -
Operation Scenario
Diagram below shows the typical operation scenario. The X80SV is a wireless networked robot. It connects to
the wireless AP or router via IEEE 802.11b/g network. The Local PC running the X80SV Control program could
connect to this network via either:
Network cable – Connect the host PC to one of the LAN ports on the back of the router (DO NOT
connect to the WAN port), or
Wireless – To connect the Local PC to the wireless router, configure the Local PC’s wireless settings
using the default wireless configuration settings found in the Network Connection session of this manual.
Typical Operation Scenario
Note: The Local PC could also be mounted on the robot instead off the robot if your application requires so.
User could be able to control the robot, see, talk and listen through the robot via the Dr Robot
®
Control program.
User could write his own remote
control program or contact
for further
support.