Dr.Frei TURBO-100, User Manual

Page: 13 / 64

EN
13
It is important to change the air filter approximately when the air filter turns
gray.
1. Remove the air filter cover by gently pulling forward.
2. Discard the gray filter.
3. Replace with a new, clean air filter.
4. Securely re-attach the air filter cover to the unit.
UNIT MAINTENANCE
Cleaning the Unit
• Check air filter, nebulizer, mouthpiece and any other optional compo -
nents before each use. Dirty or worn parts should be replaced.
• Do not store the air tube with moisture or medication remaining in the
air tube. This could result in infection as a result of bacteria.
Rinsing technique (performed after each treatment or before first use).
1. Make sure that the power-switch has been turned to the «OFF» position
and the unit has been disconnected from the power source.
2. Disconnect the air tube from the nebulizer device.
3. Disassembly components of the nebulizer kit:
NOTE: Air filters cannot be cleaned or washed. Only
TURBO-100 air filters can be used. Do not substitute
alternate material such as cotton. Do not operate
without an air filter.
a
b
c