DR. BENDER EBM 25, Manual

Page: 12 / 28

12
8.0 Speed adjustment dependent on the cutting speed
The values set out in the table are theoretical values and may be used to provide a rough guide for gear
changing. Since a whole range of other parameters also plays a major role in adjusting the speed, we can-
not offer any guarantee if the tool is damaged when using the values in the table. Drilling work for which the
speeds are outside the range of the core drill (values printed in italics), should only be completed with ex-
treme care and by trained personnel.
3 4 5 6 7 [m/s]
12 4775 6366 7958 9549 11141 2.Gang
14 4093 5457 6821 8185 9549 2.Gang
16 3581 4775 5968 7162 8356 2.Gang
18
3183
4244 5305 6366 7427
2.Gang
20 2865 3820 4775 5730 6685 2.Gang
22 2604 3472 4341 5209 6077 2.Gang
24 2600 3183 3979 4775 5570 2.Gang
26
2204 2938 3673 4407 5142 2.Gang
28 2046 2600 3410 4093 4775 2.Gang
30 1910 2546 3183 3820 4456 2.Gang
32 1790 2387 2984 3581 4178 2.Gang
34
1685 2247 2809 3370 3932 2.Gang
36 1592 2122 2600 3183 3714 2.Gang
38 1508 2010 2513 3016 3518 2.Gang
40 1432 1910 2387 2865 3342 2.Gang
42
1364 1819 2274 2728 3183 2.Gang
44 1302 1736 2170 2600 3038 2.Gang
46 1246 1661 2076 2491 2906 2.Gang
48 1194 1592 1989 2387 2785 2.Gang
50
1100 1528 1910 2292 2600 2. Gang
55 1042 1389 1736 2083 2431 1 oder 2
60 955 1273 1592 1910 2228 1 oder 2
65 881 1100 1469 1763 2057 1 oder 2
70
819 1091 1364 1637 1910 1 oder 2
75 764 1019 1273 1528 1783 1 oder 2
80 716 955 1194 1432 1671 1.Gang
85 674 899 1100 1348 1573 1.Gang
90 637 849 1061
1273 1485 1.Gang
95 603 804 1005 1206 1407 1.Gang
100 573 764 955 1100 1337 1.Gang
110 521 694 868 1042 1215 1.Gang
120
477 637 796 955 1114 1.Gang
130 441 588 735 881 1100 1.Gang
140 409 546 682 819 955 1.Gang
Bohrø Beton Beton Gestein
[mm] armiert