9
5.5 Drill bits
You can use any drill bit with a connection bore of R ½ “ or UNC 1 ¼ “. Only use drill bits which are suitable
for the stone type. Using only concentric drill bits which are not deformed, prolongs the service life of the
drive unit. Ensure that the diamond segments have an adequate undercut in relation to the drill bit.
5.6 Drilling range for different attachments
Attachment
Speed
Drill bit diameter
Planetary gearbox i=3.3 step-up
4.750 – 9.500 min
-1
9 – 20 mm
Beluga SXM without planetary gearbox
1.500 – 2.900 min
-1
20 – 70 mm
Planetary gearbox i=3.3 reduction
450 – 900 min
-1
70 – 200 mm
Planetary gearbox i=5.5 reduction
260 – 525 min
-1
120 – 350 mm
Planetary gearbox i=5.5 + i=3.3 reduction
80 – 160 min
-1
350 – 600 mm
6.0 Warranty
Pursuant to our Terms & Conditions of Sale, we offer a warranty of 12 months from the date of purchase.
This covers the free repair of material and production defects which are shown to have been caused prior
to sale.
An original sales receipt must always be produced when asserting a warranty claim. It must include the full
address of the dealer, purchase date and type code of the product. The user manual for the relevant prod-
uct as well as the safety instructions must have been followed.
Damage caused by operating errors is not covered by the warranty.
The manufacturer’s products are developed and built for specific applications. If the product is used for
purposes other than the intended purpose based on the user manual, or in the event of misuse or if unap-
proved accessories are used, the warranty shall become null and void.
The products must be regularly maintained and cleaned according to the instructions in the user manual.
The warranty shall become null and void in the event of an intervention by third parties (opening the ma-
chine).
The warranty does not cover maintenance and cleaning work.
You must ensure that only original spare parts and accessories are used. The products must be purchased
from an authorised dealer. If non-original parts are used, this may result in consequential damage and in-
creased risk of accidents. The manufacturer is not liable for such damage. Disassembled, partially disas-
sembled units and units repaired with third party parts are not covered by the warranty.
Certain parts are subject to normal wear and tear depending on use. These parts include e.g. carbon
brushes, ball bearings, switches, mains cables, seals etc. These consumable parts are not covered by the
warranty. Consumable parts are highlighted in the spare parts lists.
7.0 General Safety Instructions
The general safety instructions can be found in the supplied safety instruction booklet.
