DPX8000 Series Deep Service Switching Gateway User
Configuration Guide Firewall Service Board Module v1.0
9
Configure the IP address and mask of source NAT policy
Configure the public IP of the source NAT policy
After you configured the advanced configuration, click the Ok button on the upper right.
1.4.3
Destination NAT
To enter the destination NAT page, you choose
Firewall module > Firewall > NAT > Destination NAT
, as
shown in Figure1-8.
Figure1-8
Destination NAT
Table1-6 describes the details of destination NAT configuration.
Table1-6
Destination NAT configuration
Item
Description
ID
Displays the destination NAT ID.
In interface
Displays the inbound interface of destination NAT policy.
Common address
Displays the destination NAT policy.
Service
Displays the service type of destination NAT policy.
Expert config
Displays the expert config of the destination policy.
Advanced configuration
Displays the advanced configuration of the destination policy
Operation
Click the
copy icon and the
delete icon to do the operations.
To configure destination NAT configuration:
Click the
copy button of destination NAT policy
Configure the outbound interface of the destination NAT policy
Configure the service type of the destination NAT policy
Configure the public address of destination NAT server
Configure the inner IP address of destination NAT server
After you finish the above steps, you can click
Ok
button in the upper right.