Setup
Battery Operation
Connect power adapter
1. Connect power adapter follow
the figure.
2. After connection, the unit is in
clock mode.
NOTE:
In any time, long press the
POWER button to clock mode.
Select sound source
Press the MODE button repeatedly to select different sound source below:
BT (Wireless) / RADIO (FM) / AUX In (Audio In / Line In)
Using volume
Press the
VOL + or VOL -
Buttons to increase or decrease the volume sound.
1. Remove the BATTERY door by carefully pushing batteries cover follow
OPEN direction. The battery door can then be lifted away.
2. Following the polarity diagram as shown on the bottom cabinet insert 2
batteries and close the door.
3. Use only the size and type of batteries specified. For battery performance
and longer operating time, we recommend the use of alkaline-type batteries.
4. Do not mix old and new batteries.
5. Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
6. If the unit is not to be used for an extended period of time, remove the
batteries.
7. Do not try to recharge batteries not intended to be recharged; they can
overheat and rupture.
8. Do not dispose of batteries in fire, batteries may leak or explode.
This unit operates on 2 X `AAA' size
(UM-4) batteries (not included) for
clock time / alarm setting backup only.
NOTE:
The Battery not support the
unit main power.
4
CONNECT TO DC INPUT
JACK OF MAIN UNIT
AC ADAPTER
PLUG THE ADAPTER BODY TO AC OUTLET
BA
TTE
RY
DOO
R
DC 1.5 V X 2 PCS
UM-4 ( LR-03)OR“AAA” SIZE
BOTTOM OF MAIN UNIT
