7
indicator appears on the display, the unit will go into Standby mode
automatically after selected time has expired.
Touch the
DIMMER
button to adjust the display intensity from High / Mid / Low
to obtain the best clarity of display readout.
Touch the
LIGHT
button to switch LOW / Mid / High / OFF brightness for the
night light.
1. Press the
POWER
button to turn on the unit, the BT
indicator will flash
on the display
2. Set the Bluetooth function of your external device to ON and begin searching
for devices.
NOTE: The effective distance between your external device and this
apparatus is 10 meters (30 feet)
3. Once “
YW-012”
appears on the paired device list of your external device,
select it.
Notes: If cannot connect, press and hole
BT PAIR button to reconnect again.
4. If you are asked for a password, enter “0000”
5. When both devices are successfully connected, the indicator will light on,
now you are ready to play music wirelessly from your device.
6. Press the
PLAY/Pause
button of external Bluetooth device or
PLAY/Pause
button on the unit to start music playback.
7. Press the
/
button on external Bluetooth device to switch between
music tracks.
Note: After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device. If your device should become
unpaired of your find it is unable to connect, repeat the above steps or press
BT PAIR button again.
AC Power
Adapter Connect DC Jack
Use included adapter
AC~ Input 120 / 60 Hz , DC Output 9V , 2000
mA
Wireless Charging
Fast Charging
Loud Speakers Spec
2 Inch, 5 Watt , 4 Ohm
Specifications are typical, individual units might vary. They are subject to continuous
improvement without notice and without incurring any obligation.
Connecting Bluetooth to Your Smartphone / Tablet
Dimmer
Light Function
Specification