WL528DB
7
Transmitter installation
Before installing the button (transmitter), check if the operating range of doorbell is correct. The button
can be mounted permanently to the mounting surface by screws.
Do not install the button (transmitter) directly on metal surfaces, as it may cause inter
-
ference and reduce the range of the doorbell
/
The transmitter is recommended to be
installed in places not exposed to prolonged and heavy rainfalls and in sunny places.
If necessary, an additional cover should be used
/
When drilling assembly holes, pay
attention to the location of electric cables and other installations. It is recommended
to use a detector for detecting pipes and pipes in walls, eg KC098YB or V31 from DPM
Before using the transmitter for the first time, remove the battery protecting tape.
Battery replacement
Transmitter
Receiver
It is recommended to use alkaline batteries
/
Used batteries as hazardous waste should
be thrown into specially marked containers or handed over to a separate collection
point. Do not dispose of batteries in the trash bin
/
Do not use new and used batteries
at the same time.
Hereby, DPMSolid Ltd SP. k. declares that wireless doorbell WL528DB is in compliance with Di
-
rective 2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address: http://www.dpm.eu
Sicherheitshinweise für den Gebrauch
1. Die Bedienungsanleitung ist Bestandteil des Produktes und muss zusammen mit dem Gerät aufbe-
wahrt werden.
Summary of Contents for 5900672652154
Page 3: ......
