PRECAUTIONS
DISCLAIMER
This product is not intended to diagnose, cure or prevent any disease. LED Technologies,
Inc. makes no claims, representations or warranties regarding the ability of this product to
cure any physical, skin or mental condition. A qualified health professional should be
consulted with regards to any condition requiring medical attention.
TROUBLESHOOTING
1. System not turning on:
•
Is power adapter pushed firmly into outlet?
•
Try a different wall outlet to confirm power is available.
•
Is USB power cord pushed firmly into power adapter?
•
Is On/Off button turned on?
•
If device still doesn't turn on, call Customer Service at 1(800)337-9565
2. System shuts off abruptly prior to completion of 20 minute treatment:
•
System may shut off automatically after multiple repeated uses if the
device exceeds desired temperature. Allow device to cool for several
minutes and try again.
•
If the device continues to shut off prior to 20 minutes, please contact
Customer Service at 1(800)337-9565.
3. Some lights appear not to be on:
•
The Infrared (IR) light spectrum is not visible to the human eye. These
lights will look as if they are not on, but are operating properly. If Red
lights are on, the device is operating as designed.
•
Power Adapter
The dpl® Foot Pain Relief system is intended for the relaxation of muscles and
relief of muscle spasms, relief of minor muscle and joint aches, pain and stiffness
associated with arthritis, and to increase local blood circulation.
SYSTEM INCLUDES
•
dpl
©
Foot Pain Relief system
•
USB Power Adapter
•
User Guide
1. Power on your device.
2. Place device on or within 1/4" of the skin on your forearm for three minutes.
3. After 3 minutes check the area. If area has turned red and lasts for more than
2 hours your skin is light sensitive.
4. Discontinue use and contact customer service.
OPERATING INSTRUCTIONS
MAINTENANCE & CLEANING
Maintenance:
1. This is a medical device. It is important to keep it clean.
2. There are no user serviceable parts in device.
3. Device includes only an On/Off switch. All settings are set at the factory.
4. Use only supplied power adapter.
Cleaning:
1. Turn device off and unplug from any power source.
2. Wipe clean with damp cloth or alcohol wipes.
3. Allow to dry completely before using.
PRODUCT REPRESENTATION
LED Technologies, Inc. is constantly improving its products with the latest technology.
As a result, the actual product may differ from the product shown in images on the
packaging and in this user guide.
CONTRAINDICATIONS
WARNINGS
•
Do not operate device where it could come into contact with water. Doing so could
cause an electric shock or result in injury.
3
2
4
5
•
Always unplug power adapter from wall outlet when not in use.
•
Do not use this device on infants or young children
without physician approval
.
•
Do not shine the device lights directly into the eyes.
•
This product contains medical grade silicone. If you have or suspect you have
TRAVELING WITH DEVICE OUTSIDE USA
Power supply is designed for USA standard 120V power outlets. When traveling outside
the USA, you will need to check the local power requirements and use the appropriate
power adapter and/or converter.
CUSTOMER SERVICE
You can reach Customer Service by calling 1(800)337-9565, Monday-Friday,
8:00AM-4:30PM, Mountain Standard Time. Customer Service can also be reached by
email at [email protected].
REPLACEMENT PARTS
The following list or damaged parts can be purchased as replacement items directly
from LED Technologies, Inc. by calling Customer Service at 1(800)337-9565:
•
Contact your Doctor if you have any medical questions regarding use of this device.
•
Contact your Doctor prior to using if you:
o
Are pregnant or suspect you may be pregnant.
o
Have suspicious or cancerous lesions.
allergies to silicone, consult your Doctor prior to use.
•
•
Do not use the device if power adapter has fallen into water or is damaged in
any way. Doing so could cause electric shock or result in injury. Please contact
Customer Service at 1(800)337-9565 if power adapter has been damaged in
any way.
Stop using device immediately if you think it is defective. Using a damaged
device could result in injury. Contact Customer Service at 1(800)337-9565.
•
Do not bend or abuse the wire of the power adapter as this can cause
electrical shock and problems.
•
Use only the supplied power adapter. Use of incorrect power adapter could
damage the device. Contact Customer Service at 1(800)337-9565.
•
Do not attempt to take the device or power adapter apart. Any modification or
attempted service will void the warranty.
•
Do not store device in sun or location with high temperatures as this may cause
damage to the device.
•
•
Discontinue use and contact Customer Service if device overheats or becomes
uncomfortably hot to your skin.
Device is not designed for walking or standing. Do not stand or walk while
wearing the device. Personal injury and damage to the device may occur.
1. Wash and dry area prior to use.
2. Insert device USB power cord into provided USB power adapter.
3. Plug power adapter into electrical outlet.
4. Place device on feet.
5. Press On/Off switch to the On position to start device.
6. Leave device over treatment area for15-20 minutes.
7. Move On/Off switch to the Off position to stop device.
8. Device may be used multiple times per day. Do not exceed 3 treatments
per day.
dpl® Foot Pain Relief System
This is a light emitting diode (LED) device that emits energy for use in pain relief,
penetrating deep into the skin to ease and repair damaged tissue. The device
delivers natural light energy in the Infrared and Red spectrum. The device treatment
time is controlled by the operator. There are no user settings or adjustments.
LIGHT SENSITIVITY TEST
Test yourself for light sensitivity prior to initial treatment:
•
Do not use this device if your skin is light sensitive or you are currently using
medication that may cause skin sensitivity to light. Doing so may result in
photosensitive reaction.
•
If unsure whether your medication causes sensitivity to light, confirm with your
physician prior to using this device.
•
Discontinue use immediately if you experienced any sensitivity to using this
device.
•
Use only with UL/ETL listed extension cord or power strip.
•
Do not exceed recommended treatment times or usage.
