Defense Property
Accountability System
Setup & Troubleshooting Your CN3G/CN3eG
In the unlikely event the PDCD freezes up, it will need to be re-booted. There are three
ways to do this. Warm Boot, Cold Boot and Clean Booting. It is recommended to try
Warm Booting first.
To Warm Boot:
This process will restart your PDCD. You would use
this process if your PDCD freezes up.
1. Hold in the power button for about ten seconds
until the screen turns blue , and says Intermec.
2. This will restart the PDCD.
22
DPAS Support Documentation
