MONO
If only one microphone is connected to either
input I or II, MONO is chosen automatically.
The mic input will be routed to both left and
right output. Only one GAIN slider and FILTER
button will be available in this mode.
STEREO
Use STEREO when you need to capture
sound sources in stereo. Both microphones
are controlled with one GAIN slider. Example:
Ambiance sounds can be recorded in stereo
using two mics that have the same sensitivity.
Important: When using STEREO you must
use two mics that are optimized for stereo
recording, for instance the specially-selected
d:screet™ 4060 pair included in the d:vice™
Kit VIDMK-4060-S.
Other available kits include: SMK4060,
ST4006*, ST4011*, ST2006*, ST2011*
* Must be used with DPA MMP-G amplifiers for connection
to MicroDot.
DUAL
Use DUAL when the gain must be set
individually for input I and II (for example, with
two different microphone types or in situations
where two people with different voice levels are
to be recorded). The FILTER buttons are also
individual in this situation.
PRESETS
Presets store your preferred settings for specific
microphone(s) and make your set up easier.
After choosing your settings, create the preset
by pushing the numbered preset button of your
choice for three seconds. The next time you
plug in the same mics, push your preset button
and you are ready to go – no adjustments
necessary.
Summary of Contents for d:vice
Page 1: ...User s Manual ...