Cleaning
d:fine
TM
4066 & 4266 mic grids
Remove the mic grid from the mic element and clean the grid using a soft cloth and demineralized
water only. Make sure the grid is dry before remounting it on the mic element. This is not possible
on the d:fine
TM
4088 and 4288 types as the diaphragm is protected inside the mic housing and the
protection grids are not removable. Therefore, for these two mics, no attempt should be made
to clean the grid surface and extreme care should be taken not to clog the grids with makeup e.g.
Clothing clip for d:fine
TM
4266 & 4288 Head-
set types
The supplied clothing clip allows you to at-
tach the cable to your clothes, thus relieving the
cable draw to the headset mic. This is essential on
especially the single-ear headset mic.
Color codes & cable steer
d:fine
TM
4166 Omnidirectional & 4188 Direc-
tional Microphone types come with a number
of cable steer clips in different colors. Mounted
on the cable relief, this clip allows for quick rec-
ognition of a specific headset microphone.
Protection cap
The d:fine
TM
4166 Omnidirectional & 4188 Di-
rectional Microphones come with a red plastic
cap which serves to protect the microphone
head when putting on makeup, hairspray and
more. Remove the cap before use.
