CKRS
INLINE CIRCULATING PUMP
OWNERS MANUAL
Page 1: ...CKRS INLINE CIRCULATING PUMP OWNERS MANUAL ...
Page 2: ...een designed to pump warm liquids without suspended abrasives that can damage the wet rotor operation Operation condition The pump is lubricated and cooled by the liquid being pumped It will cause severe damage when the pump runs dry for over 10 seconds peration condition Installation pump is lubricated and cooled by the liquid being pumped l cause severe damage when the pump runs dry for over eco...
Page 3: ... the pump flange for direction of water flow talled in vertical or horizontal piping but be sure aft must be always in horizontal position Plug in the power cord Turn the switch to any speed Open the tab Screw off the vent screw until water come out 1 2 3 The connection should be installed according to the procedures as shown in Picture below 1 2 3 4 Release the vent screw until the water comes ou...
Page 4: ... Removal or installation of the product E Normal wear and tear F Water and Insect ingression G Exposure to corrosive conditions H Dry run I Foreign objects in the liquid being pumped J Electrical power fluctuations K Freight Argon Distributors liability is limited to the cost of the product and shall not be liable for A Damage to other property caused by defects in the product B Loss of use of the...
