S 400 BT
USER MANUAL
HOW TO SWITCH ON AND OFF THE CONTROL MODULE:
Press the control module on/off key. The display will light up and
either the audio program or the time will be shown on it. Press again
the on/off key to switch the control module off.
GENERAL SYSTEM ON/OFF: Pressing simultaneously the on/off
and > keys all the control modules of the multiroom system will
switch on while a flashing “ON” will be shown on the display.
Pressing simultaneously the on/off and < keys all the control modules
of the multiroom system will switch off while a flashing “OFF” will
be shown on the display.
CHANNEL AND AUXILIARY AUDIO INPUT SELECTOR
Push the CH key to change the audio program. The selected channel
will show on the display.
VOLUME CONTROL: While the control module is on press the >
key to turn the volume up and the < key to turn the volume down.
CONTROL OF BALANCE AND MONO/STEREO SOUND
While the control module is on, press repeatedly the MOD key until
the feature you want to adjust is shown on the display. Then use the
keys < and > to regulate the function.
TIME SETUP: Either when the control module is on or off, press
repeatedly the MOD key until the function “SET” is shown on the
display. Set the time using the < > keys. Once the time is set in one
module, the rest of control modules will automatically be sincronized.
AUTO OFF SETUP: While the control module is on, press repeatedly
the MOD key until the “AUTO OFF” function is shown on the display.
The time countdown for automatic desconexion will set by pressing
the on/off key repeatedly (time will increase in intervals of 15 minutes)
or using the < > keys (time will increase in intervals of 1 minute).
AUTO ON SETUP: While the control module is off, keep pressed
the on/off key until the “AUTO ON” function is shown on the display.
The time countdown for automatic conexion will set by pressing
the on/off key repeatedly (time will increase in intervals of 15 minutes)
or using the < > keys (time will increase in intervals of 1 minute).
SLEEP MODE: While the control module is on, press repeatedly the
MOD key until the function “SLEEP” is shown on the display. The
switch off time can be set by pressing the on/off key repeatedly (time
will increase in intervals of 15 minutes) or using the < > keys (time
will increase in intervals of 1 minute).
Another way to activate this function is by keeping pressed the on/off
key during 3 seconds while the control module is on. When the
“SLEEP” mode is shown on the display, the switch off time can be
set by pressing the on/off key repeatedly (time will increase in intervals
of 15 minutes) or using the < > keys (time will increase in intervals
of 1 minute).
ALARM CLOCK SETUP: Either when the control module is on or
off, press repeatedly the MOD key until the “ALARM” function is
shown on the display. Using the < > keys the alarm time can be set.
Immediately after the alarm mode (CH1, IN or BEEP) can be chosen
by pressing the alarm clock key on the right hand side. The alarm
clock volume can be also preset using the < > keys. A small bell
symbol on the display will show the alarm clock is on.
To switch off the alarm clock when ringing just press any key.
To deactivate the alarm clock function press repeatedly the MOD
key until the “ALARM” function is shown on the display. Immediately
after press repeatedly the alarm clock key on the right hand side
until “ALARM OFF” is shown on the display. The bell symbol will not
appear on the display any more.
The control module memorizes the last alarm clock setting if no
new features are introduced.
CALL RECEPTION AND BABY-PHONE LISTENER
Either when the control module is on or off, calls from built-in
microphone control modules can be received. The zone number of
the zone that is calling will show on the display “CALL IN + NR”.
The S 400 can be activated as a listener control module in the baby-
phone function. After having activated the control module in the
children’s bedroom (this must be a built-in microphone control
module) press twice the MOD key in the listener control when the
module is off. “PARENT” will show on the display. Use the < > keys
to activate or deactivate the listening function.
Up to 5 baby rooms and 5 listening areas can be selected to be
working simultaneously.
The listening volume can be adjusted using the < > keys, is independent
from the program volume and is automatically memorized by the
control module.
DO NOT DISTURB MODE: When the control module is on, press
repeatedly the MOD key until “
DONT DISTURB:OFF
” is shown on
the display. Press the > key to activate the “do not disturb” function.
DONT DISTURB:ON
” will be shown on the display. From that
moment the control module will not receive any call.
To deactivate this function, repeat the operation and press the key
<. “
DONT DISTURB:OFF
” will be shown on the display and from
that moment the “do not disturb” mode will be deactivated.
AUXILIARY AUDIO INPUT (IN): Connect the audio player jack in
the audio socket. Press the auxiliary audio input key until “IN” is
shown on the display.
BLUETOOTH CONNECTION:
With the control module turned on, press the key
with the
symbol until the
BLUETOOTH
function
appears moving along the screen. Then keep this key
pressed for two seconds so that the
BLUETOOTH
function goes into visible mode.
BTDISCOVER
will
appear on the screen.
From that moment you have one minute to search
your device
"DOYSON-xxxxxx"
, select it to pair it
and enter the
code 0000
. The module will show on
the screen
BT: ON
to indicate that it is linked. When
sending music from your device,
PLAY
will be displayed
on the screen.
For future occasions you only need to connect from
your mobile device with the desired area, even when
the control module is turned off.
