background image

BTF-A.DOC

1102

1

DOYON PLANETARY MIXER BTF

007/010/020/040/040H/060/060H

TABLE OF CONTENTS

TO GET THE BEST PERFORMANCE OF YOUR MACHINE, PLEASE READ THIS MANUAL.

CHAPTER 1 – RECEPTION OF THE MERCHANDISE . . . . . . . . . . . . . . . . . . . . . . .  2

  NAMEPLATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2

CHAPTER 2 - GENERAL DESCRIPTION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3

CHAPTER 3 - MIXER USE

3.1. - General description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.2. - Machine characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
3.3. - Improper use of the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4

CHAPTER 4 – TECHNICAL DATA

4.1. - General information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
4.2. - Technical characteristics  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6
4.3. - Electric motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.4. - Electric installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.5. - Security system  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7
4.6. - Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   9

CHAPTER 5 - ELECTRIC CONNECTION AND INSTALLATION

5.1. - Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.2. - Electric connection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11

CHAPTER 6 – MIXER OPERATION

6.1. - Tool’s settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
6.2. - Bowl’s settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14
6.3. - Working operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.3. – Hub attachment operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

CHAPTER 7 - MAINTENANCE

7.1. - Machine’s cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16
7.2. - Control of belt’s stretching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16

CHAPTER 8 – SAFETY INSTRUCTIONS     

8.1. - Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17
8.2. - Special precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17

ELECTRIC SCHEMATICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19

(BTF007,BTF010,BTF020),(BTF040,BTF040H),(BTF060,BTF060H)

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Summary of Contents for BTF007























Reviews: