Swap to Left-Handed
POST
POST
Be careful to keep inner parts in place.
Remove base from Button Body.
Carefully remove spring, button clip and spindle.
Rotate mounting base, button clip, and spindle 180° then
reassemble.
Repeat on Latch body.
31/08/16
LEFT
RIGHT
Viewed from
inside the Property
START
CENTERLINE
OF LATCH
3/4"
SPINDLE
THRU
HOLE
GATE
FRAME
3/4"
FIG. 1
Spindle
12mm
Screw
30mm
Screw
Cut 11-13mm
Longer than Gate Post
Spindle Tube
MUST be fitted
Spindle Tube to be
11 to 13mm longer
than Gate Post
Spindle
INSIDE
LATCH
OUTSIDE
LATCH
CENTERLINE OF LATCH
3/4"
SPINDLE THRU HOLE
GATE FRAME
3/4"
FIG. 1
Spindle
12mm
Screw
30mm
Screw
Cut 11-13mm Longer than Gate Post
Spindle Tube MUST be fitted
Spindle Tube to be 11 to 13mm longer than Gate Post
Spindle
INSIDE LATCH
OUTSIDE LATCH
CENTERLINE OF LATCH
3/4"
SPINDLE THRU HOLE
GATE FRAME
3/4"
FIG. 1
Spindle
12mm
Screw
30mm
Screw
Cut 11-13mm Longer than Gate Post
Spindle Tube MUST be fitted
Spindle Tube to be 11 to 13mm longer than Gate Post
Spindle
INSIDE LATCH
OUTSIDE LATCH
Next step
is on
the back
page.
Mounting base
Button clip
Spindle
Button (do not rotate)
Spring
Button Body
Mounting base
Button clip
Spindle
Button (do not rotate)
Spring
Button Body
Left or
Right?
The Latch comes ready
for Right-Handed gates. A
few simple steps and the
Latch is ready for
Left-Handed gates.
CENTERLINE OF LATCH
3/4"
SPINDLE THRU HOLE
GATE FRAME
3/4"
FIG. 1
12mm
Screw
30mm
Screw
Trim Spindle Tube 11-13mm Longer than Gate Post
Spindle Tube MUST be fitted
Spindle Tube to be 11 to 13mm longer than Gate Post
Spindle
INSIDE LATCH
OUTSIDE LATCH
GRAVITY
Latch
no-drill
install
- Suits 50 - 125mm Posts
- Two-Way Access
- Lock-unlock from same side
- Exit when locked
from outside
DPG300
GRAVITY
Latch
no-drill
install
- Suits 50 - 125mm Posts
- Two-Way Access
- Lock-unlock from same side
- Exit when locked
from outside
DPG300
GRAVITY
Latch
no-drill
install
- Suits 50 - 125mm Posts
- Two-Way Access
- Lock-unlock from same side
- Exit when locked
from outside
DPG300
