Temperature Protected:
The heating coil reached the
maximum allowed temperature during the puff. If this
happens, the DNA 75C will continue to re, but will not
be able to provide the desired wattage.
Ohms Too High:
The resistance of the atomizer coil is
too high for the current wattage setting. If this happens,
the DNA 75C will continue to re, but will not be able to
provide the desired wattage. The Ohms Too High
message will continue to display for a few seconds
after the end of puff.
Ohms Too Low:
The resistance of the atomizer coil is
too low for the current wattage setting. If this happens,
the DNA 75C will continue to re, but will not be able to
provide the desired wattage. The Ohms Too Low
message will continue to display for a few seconds
after the end of puff.
Too Hot:
The DNA 75C has onboard temperature
sensing. It will shut down and display this message if
the internal board temperature becomes excessive.
Installing Battery:
Ensure you use only high-drain battery for optimum
performance and safety.Make sure the positive and
negative ends are facing the correct directions.
External charging (Recommended):
Remove battery from device.Follow
charging instructions with using charger.
5. BATTERY INSTALLING AND CHARGING
